BTNCL - 304012 BRULIN SD 1291

  • MSDS: BTNCL
  • Manufacturer: BRULIN AND CO INC
  • Product Name: 304012 BRULIN SD 1291
  • National Stock Number: 6850-00F034179
Product Identification

Product ID:304012 BRULIN SD 1291
MSDS Date:07/08/1993
FSC:6850
NIIN:00F034179
MSDS Number: BTNCL

Responsible Party
BRULIN AND CO INC
2920 DR ANDREW J BROWN AVE
INDIANAPOLIS, IN 46206-0270
US

Emergency Phone: 317-923-3211/317-923-3233

Info Phone: 317-923-3211/800-428-7149

Cage: 94058

Contractor
BRULIN AND CO INC
270 INDIANAPOLIS, IN 46205-0270 US

Telephone: 317-923-3211

Cage: 94058

Ingredients

ETHYL 3-ETHOXYPROPIONATE

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: 10-30%


DIPROPYLENE GLYCOL METHYL ETHER, DOWANOL DPM, DIPROPYLENE

CAS: 34590-94-8

RTECS: JM1575000

Fraction By Weight: 50-70%

OSHA PEL 100 PPM SKIN

ACGIH TLV: 606 MG/CUM


ESSENTIAL OILS AND AROMATICS

Fraction By Weight: 0-1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION. INHALATION:
RESPIRATORY IRRITATION. INGESTION: GI IRRITATION/MODERATELY TOXIC.
SKIN: IRRITATION/DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of
Overexposure:REDNESS/TEARING/IRRITATION/HEADACHE/NAUSEA/DIZZINESS/V
OMITING/DIARRHEA

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MIN. INHALATION: REMOVE TO FRESH
AIR/GIVE OXYGEN IF NECESSARY. SKIN: WASH W/SOAP/WATER. INGESTION:
GIVE TWO GLASSES OF WATER & INDUCE VOMITING. NEVER GIVE UNCONSCIOUS
PERSON ANYTHING BY MOUTH. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:160F/178F
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:WATER FOG MAY BE USED TO COOL CLOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:NEVER USE WELDING/CUTTING TORCH ON/NEAR
DRUM, EVEN EMPTY.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. ABSORB ON SOLID ABSORENT/SHOVEL INTO CONTAINERS. FLUSH
RESIDUES W/WATER.

Handling

Handling and Storage Precautions:STORE BETWEEN 40F/120F.
Other Precautions:AVOID BREATHING SPRAY MISTS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR. CONTACT
LOCAL SAFETY EQUIPMENT SUPPLIER FOR RECOMMENDATIONS.
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:BUTYL RUBBER
Eye Protection:GOGGLES
Work Hygienic Practices:WASH HANDS AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FLASH POINT METHOD CON'D: PMCC/COC.

Chemical Properties

Boiling Pt:B.P. Text:212-350F
Melt/Freeze Pt:M.P/F.P Text:<0F
Vapor Pres:0.4
Vapor Density:5.11
Spec Gravity:0.948
Evaporation Rate & Reference:(N BU AC = 1): <0.1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID, MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDZERS
Stability Condition to Avoid:TEMP <40 & >120F
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.